Lab for Thin Films - Nanobiomaterials - Nanosystems - Nanometrology

inside3

LTFN posseses a clean room environment for scientific research of 500m2, with a low level of contamination such as dust, airborne, aerosol particles, and chemical vapors. In general, a cleanroom has a controlled level of contamination that is specified by the number of particles per cubic meter at a specified particle size. In Organic Electronic device packaging for instance, the default classification is ISO 5 (or a class 1.000,000) cleanroom.

r2r 01 r2r 02

Large Area manufacturing of OPVs onto plastics with Laser scribing and In-line metrology systems.

Gravure Printing

R2R Gravure printing for high-throughput, high-quality printing with high resolution for manufacturing printed electronics.

Slot-Die Printing

R2R Slot Die coating provides smooth layers with homogeneous thickness in web direction and cross-direction and it can enable patterning of continues stripes of functional materials for organic electronic devices.

Inkjet Printing

R2R Inkjet printing allows direct patterning of all the layers, offering full freedom of design without the use of masks or structuring by hardware.

Screen Printing

R2R Screen printing allows the formation of a very thick wet layer and thereby also very thick dry films, which can be useful for printed electrodes where high conductivity is needed.

Laser Patterning

R2R Laser patterning enables the P1-P3 serial integration of flexible organic thin-film solar cells on polymer substrates, thus allowing new approaches to the module design.

Encapsulation Module

Encapsulation System equipped with 2 rolls for the lamination of High Barrier Films onto Flexible Electronic Devices. R2R Encapsulation takes place in the Lamination/Delamination Station, where R2R produced devices can be protected with high barrier films from oxygen and moisture.

Raman Spectroscopy

In-line Ellipsometry

inline ellips

S2S Gravure Printing

Printing using a sheet-to-sheet (S2S) lab scale gravure printing proofer for the optimization of layers for the fabrication of flexible organic electronic devices by a versatile and scalable gravure printing process.

gravure

 

Slot-Die mini Roll Coater

A compact slot-die coater and flexographic printing unit for flexible substrates. It is capable of coating without the operator having to touch the coated layers, while mimicking roll-to-roll coating conditions.

 

Inkjet Printing

A bench-top precision digital deposition system with versatile capability for high precision jetting of functional fluids on any type of surface. The system provides an easy-to-use, cost-effective tool to quickly develop and test processes and prototypes.

inkjet 01

s2s 01

Hybrid printing and vacuum technologies for OE devices.

S2S Lamination System for the Encapsulation of Organic Electronic Devices in room or higher temperatures. Organic Electronic Devices are laminated in the S2S Encapsulated System under pressure at room or higher temperature conditions in various speeds.

Gas transport deposition of small molecules for OE devices.

OVPD is an innovative technology for thin-film deposition of organic small molecules based on the gas phase transport principle for the production of Organic Solar Cells (OSCs), Organic Light Emitting Diodes (OLEDs) and flexible electronics. In addition, the introduction of in-line Spectroscopic Ellipsometry (SE) and Raman Spectroscopy (RS) at OVPD Cluster forms a unique combination for the production of optimized organic electronic devices.

Copyright © 2016-2017 LTFN. All Rights Reserved.